Réparez vos affaires Communauté Boutique

Repair and disassembly information for the fifth-generation 12.9" iPad Pro featuring Apple's M1 SoC and an XDR mini-LED display.

27 questions Voir tout

Options

iPad Pro 5th Generation won't boot black screen, limited amperage draw

The iPad suffered impact that shattered screen. The amperage draw is continually .48, far below normal, regardless of how long it has been left on the charger. The charging port has been replaced and tested with no change. The screen has been replaced as well. The screen is black and there is no evidence it ever boots. Have tried soft reset (vol up, vol down, power). No change. New MFI cables and chargers have been tried. It will not mount for wipe/restore. Does not appear visible to external devices.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Did the device function before the screen repair?

I know the iPad pros need a lot of juice to charge. Have you tried any fast chargers?

Did you disconnect the battery while replacing the screen? If so, double check to make sure you have the battery screw securely in place. If you didn't disconnect the battery, you might've caused damaged to the board. Or if you pried between the battery connector you could've damaged that as well.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

No, the customer brought it to me functioning this way. It's currently on a fast charger, but hasn't changed in symptom.

par

Ajouter un commentaire

Ajouter une réponse

jparks sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 7

Total : 49