Rep: 1
1
My phone screen works perfectly when not fitted into the frame but as soon as I fit it into the frame and do the final click at the bottom of the screen, touch stops working. As soon as I pop it out at the bottom of the screen, touch comes back again. Any ideas why? Thanks
Cette question est-elle utile ?
Rep: 1,6k
4
1
@briangardner Have you screwed in the final two screws? I had a bizarre issue with a laptop where it would not start once fully assembled unless the screws were put in. I have no clue why but it worked, maybe something to do with screwed-in components having to make contact with the part behind it.
Cette réponse est-elle utile ?
Hi thanks it yes the two screws have been put in and it’s still not working.
Alright, remove the screws and open up the phone again. Unscrew and remove the cover over the flex cable. Turn the phone on, and use your finger to press gently on the flex cable connector where it connects to the motherboard. Please keep all metal objects away from the phone when you do this, because the motherboard is exposed. Does touch stop working when you do that?
I’ll give that a try later thanks. Thanks for your help.
Dernières 24 heures : 0
7 derniers jours : 4
30 derniers jours : 5
Total : 35
