Réparez vos affaires Communauté Boutique

Documentation de réparation pour le contrôleur initial Sony PlayStation 5 DualSense. Numéro de modèle : CFI-ZCT1W ID FCC : AK8CFIZCT1

81 questions Voir tout

Options

Why is my anolog replacement never central

Hi all

First time asking a question on here so here it goes.

I've recently come across a broken controller that I'm repairing. The issue is stick drift and I've decided to change the anolog and re solder a new one on. Everything has gone great and the repair was a success. However, whenever I tested it on Gamepad Tester and the anolog is not central. It's always rather 0.4 to the left or right.

Is there a way to get the anolog closes to the centre as possible or is this impossible?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Usually you cannot get the analog completely centered. It will always drift a bit to some direction. Even the "professional" controllers have it same. If the 0.4 drift doesn't affect gameplay in any way or register as movement, it's completely normal.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire
Réponse la plus utile

Options

Most of them have potentiometers on them, so that you can adjust the thumbstick itself. If you can't center it that way, you can try adding a resister to the board.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Ajouter une réponse

David Brooks sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 24