Nin. Sw. Lite is not responding to charging. I have the back shield off, is there a set of contacts to the battery that I can monitor with a DVM - to see if when the charger is attached and powered that the voltage is higher than w/o the charger attached.
Cette question est-elle utile ?
Rep: 782,5k
1,1k
893
2,3k
@jgbsr yes you can. Follow this guide Nintendo Switch Lite Battery Replacement - iFixit Repair Guide right to step 10. do not remove any cables etc. Now get a multimeter and place it on something like a 30 VDC range. Place the red probe on the red contact of the battery connector and the black on the black contact.
Measure the voltage with your Switch plugged in and with it not plugged in. You will see a higher voltage with it plugged in. If the voltage does not change. You are having issues with the charging circuitry/charger.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 2
30 derniers jours : 2
Total : 33
1 commentaire
@jgbsr I assume that you are referring to a Nintendo Switch Lite
par oldturkey03