Réparez vos affaires Communauté Boutique

A1706 / EMC 3071 – sorti en novembre 2016, ce MacBook Pro 13" présente le Touch Bar avec écran OLED. Il inclut un processeur Intel Core i5 dual-core "Skylake" et quatre ports Thunderbolt 3.

239 questions Voir tout

Options

1RS fell off during battery replacement, fan on constantly

I recently replaced my battery, tested and it’s working fine.

I noticed when I initially removed the lower case a “1RS” was out of place. I’m not sure if this happened when I was removing the case.

  1. what is a 1RS?
  2. Can it be replaced (soldered back into place)
  3. Do I need a new part?

When I turned my MacBook on, the battery was working perfectly, charging etc, however the fan has been on constantly.

I’ve preformed a SMC, PRAM & NVRAM reset and the issue with the fan still exists.

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

@bmcdermott that is reference designator L3500 which is a PIM B062D-SM series 1.5UH 20% 12.5A 0.017OHM inductor. The series is hard to match but the inductor is available at places like this Even so the series is different, it will still fit the solder pads. If unsure of that download the datasheet for the inductor from the site I linked to and it will have the dimension for the solder pads on there. Does not look like it is related to your fan issue at all but it is part of the TBT 5V regulator circuit.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Oonagh sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 18