Réparez vos affaires Communauté Boutique

Tutoriels de réparation et assistance pour votre téléviseur LG.

1343 questions Voir tout

Options

My Oled tv doesn´t turn on after bezel was bent,

Hi

I recently acquired an LG oled TV (OLED55CX6LA) for free. The tv won´t turn on after

the bezel around the screen was dented (very small dent!).

The TV only goes to standby and when I try to turn it on the relay clicks once and it goes back to standby. I tried disconnecting the four panel connectors to the T-con board one by one to no effect. I then disconnected the lower cable connecting the main board to the t-con board and then turned on the tv. Still no picture but the relay didn´t click when the cable was disconnected.

Any ideas on what the issue might be?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

At first this sounded like a possible power supply issue but since there was no relay click after you disconnected the mainboard I would suggest you check for any damages on your mainboard and your T-board. I believe the issue might be revealed there. Maybe the dent caused minor but critical damage?

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

Hi, thank you for answering. I will take them out and let somebody look at them (I have very limited experience with electronic repair).

par

Ajouter un commentaire

Ajouter une réponse

Ágúst Ingvarsson sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 12

Total : 66