Aller au contenu principal

Guides de réparation et support pour les smartphones produits par Doogee.

74 questions Voir tout

I manaxed to break my s60 light's battery cable

Hello, I broke an old Doogee S60 Lite mobile after opening it. I broke the ribbon cable connecting the battery. I tried fixing it with my soldering iron, but that just made the cable look more broken.

Block Image

Block Image

Block Image

Block Image

Block Image

My first idea was to buy a new cable, but I couldn't find one online. I thought I might as well buy a new battery with a cable, but you can't ship lithium (and in the screenshot I included, the connector seems to be on the wrong side!). So, any ideas?

Block Image

Note: I don't actually need this old phone, but I am haunted by the idea of having a degree in electrical engineering only good to decorate the wall, as they say here.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

2 Réponses

Réponse la plus utile

Hi @micro_s

Search online for BAT17S605580 battery to find suppliers that may suit you better.

Cette réponse est-elle utile ?

Indice 1

1 commentaire:

Your link helped, unfortunately I'm not sure I can import Li batteries to where I live, however this is useful for anybody else.

par

Ajouter un commentaire

@micro_s how good are your soldering skills. take a look at the cable,, right by the connector. You see that it even lists the contacts and where these go: (P+) (NTC) (P-) Now, use a couple of strands of copper wire, like from an old LVDS cable etc. Something thin. Solder those from the battery to the connector. So instead of trying to repair your flex cable, simply apply jumper wires. Of course, after soldering, ensure that those wires are insulated so as not to shorten out on either the chassis, or amongst itself.

Easiest fix would be to not fix it at all, but to replace the battery, as my esteemed colleague already mentioned :-)

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Do you mean replace the ribbon cable completely and solder the LVDS cable to its connector, or repair the ribbon cable using the LVDS cable?

update: now the connecter piece that attached the cable to the circuit board broke, I can't use this method any more without soldering it directly to the board!

par

Ajouter un commentaire

Ajouter une réponse

micro_s sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 21

Total : 37