Hello, This iPad had a badly broken digitizer and screen. I installed a brand new digitizer screen assembly using clamps to ensure a firm and consistent seal. What could be causing the new screen to have a colored strip with various colored lines on the left side of the screen?
Cette question est-elle utile ?
Rep: 789,5k
1,1k
897
2,4k
@timothyyoder looks like a damaged screen. Time to replace it once more, just this time skip any clamps since those can cause pressure damage.
Cette réponse est-elle utile ?
Just what I was suspicious may have happened. Guess I’ll prove it with a new screen. Thanks for your input.
@timothyyoder hope it works out for you. Let us know what happens after you change it once more
Rep: 49
3
1
Hi Tim, digitizers are extremely delicate and there may be a chance that during the installation that some debris or small particle could have put pressure on the screen and cause the ribbon. I would try to disassemble it as carefully as possible and examining if whether or not there is significant damage to the digitizer underneath. Hope this helps!
Cette réponse est-elle utile ?
Thank-you for your advice.
Dernières 24 heures : 22
7 derniers jours : 22
30 derniers jours : 22
Total : 22
2 commentaires
Is this problem similar to the one you replaced it for?
par Hampter
@hampter Not that I am aware of although parts of the screen were black/unreadable from being broken.
par Timothy Yoder