Aller au contenu principal

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

Questions au sujet de 1505 Voir tout
Question résolue

Can a board be water damaged without showing it?

I have an iPhone 3G that refuses to connect to the computer. I've taken it apart and replaced the dock connector, as that showed the water damage sticker, but that did not fix the problem. The rest of the board *appears* to be fine, but I'm not sure now. Additionally, the headphone jack is still white (as opposed to red).

Any idea as to what could be wrong?

Répondez à cette question J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire

3 réponses

Does the iPhone work well? Have you tried with more cables? with any other computer? Maybe it can't give 2A of power to the USB port, try disconnecting all and connecting only the iPhone. Let me know...

Cette réponse est utile ?

Score 0
Ajouter un commentaire

It's pretty well DOA. The previous owner had it jailbroken, and it was then reset, which typically means that it has to be plugged into the computer for a restore. It worked decently before that, though the cell radio might not have worked.

I've tried it with... hmm, about 5 different cables and 8 different computers. It never even pops up, even when put in DFU mode.

Cette réponse est utile ?

Score 0
Ajouter un commentaire

Hi Josh / All,

I have one with the same error. I can get it to turn on and get it into DFU mode - but it doesnt appear to 'ping' the PC?

by that I mean generally speaking you hear the iPhone connect to the computer and start processing the recovery drivers - this one doesn't.

I've switched everything possible. basically put the logic board into different handsets with different batteries/dock connectors etc - had no luck at all.

I've just finished the process of cleaning the PCB with PCB & Flux cleaner - again no luck.

The previous guy I think had tried to replace the back cover and ended up using superglue. I know this as there was some on the board. After cleaning etc I thought that might do the trick - bold textJosh if you havent tried that I would recommend doing it!!

I had one previously that seemed to navigate the menu's by itself - 1 night resting after a spray with the PCB spray fixed it.

shame this one wont :(

please help someone!! I wish I knew someone with a MAC I could try it with - they work better with them dont they?


Cette réponse est utile ?

Score 0
Ajouter un commentaire
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,698