Rep: 35
3
1
I am thinking of getting a 3DS for cheap (cheap because its 'charge port is bad'), but I was wondering just how easy or difficult it would be to repair it.
I have a soldering iron and decent soldering experience, but it'd still be nice to know if it even COULD be repaired before I try.
Cette question est-elle utile ?
Rep: 783,7k
1,1k
894
2,3k
Kizul Emeraldfire , nothing is ever really easy:) take a look at this guide. Right around step 7 and 8 do you see the port clearly. It is soldered unto the logic board. So if you are pretty good with soldering small components onto a board, it should be a straight forward repair. The part is available from places like this. Not a bad price :) and absolutely doable. Hope this helps, good luck.
Cette réponse est-elle utile ?
Hm... Would I *need* to get a replacement port component? I probably wouldn't if it was just broken solder (re-soldering it would be a cinch), but would something like that actually 'burn out'? o.O?
It would not burn out, but it is possible that the contacts are bend from pulling the plug sideways to often or the contacts on the logic board may have cracked and not making proper connection with the logic board. The only way to know that, is by looking at it and may be checking with a multimeter.
I see — thank you very much! You've been most helpful :)
What if the part actually broke off
Rep: 13
1
If the dc 4v in port is damaged (around 75% of this has happened), plug the charger into the charging dock that came with the Nintendo 3DS. You may need to hold the bottom right corner upward to charge it. This isn't the best fix but it works. Continue the holding process until you have a sufficient charge.
Cette réponse est-elle utile ?
Hopefully this helped
This actualy worked for my 3ds but somtimes it bends the metal parts on the cradle.
Rep: 7
1
2
Umm... how would you go around repairing/changing out the 3DS charge port in the first place? Mine recently got bent out of shape (kind of literally) so...
Cette réponse est-elle utile ?
Just like the original answer said, disassemble it, desolder the old one and resolder a new one:-) It is really not that bad:-)
But I don't know how to do that.
Is there anybody that can do it for you? Do you have the tools, or can you get them? Can you practice on some old boards?
Sera, you should look up and research the skill of soldering. In basically, you use a iron rod that's heated up to melt solder, a tin and lead alloy (sometimes copper replacing the lead), and connect electronic components with it, like wires. You should probably make a question here on ifixit and get some help from people like oldturkey here.
Here is a bit of a guide Comment souder et dessouder des connexions
What can you do if the gummy part is missing ?
Cette réponse est-elle utile ?
Watt gummy part?
My 4.6=IN is broken on my 3DS. What should we do about my 3DS?
Cette réponse est-elle utile ?
Dernières 24 heures : 8
7 derniers jours : 55
30 derniers jours : 246
Total : 52,927
5 commentaires
It's not always "the port" that's the problem.. Fuses and power chip is sometimes at fault.
par pollytintop
you know where it says 4.6=IN I put my charger in but it does not charge can someone help me with this problem... I do not know what is wrong...
par shane bryant
My 4.6=IN is broke watt should I do now?
par Quintyn Ayers
On my Nintendo 3DS.
par Quintyn Ayers
I need a solution how to fix my 4.6=IN the inside of the port was removed now i need to replace or Repair it
par Johann Lagrimas