7 août 2014
Version actuelle par :
Dan
Texte:
Here's a breakdown of the more common bits: [image|378984|align=center] - The TR screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw. + The TR (Tamper Resistant) Trox screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw.
Statut:
open
7 août 2014
Modifié par :
Dan
Texte:
Here's a breakdown of the more common bits: - [image|378984|align=left] + [image|378984|align=center ] The TR screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw.
Statut:
open
7 août 2014
Contribution d'origine par :
Dan
Texte:
Here's a breakdown of the more common bits:
[image|378984|align=left]
The TR screw has a pin in the middle of the hole so a standard Torx bit can't grab the screw.
Statut:
open