Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the plastic Phillips screw towards the front of the door panel.
-
Use a flathead screwdriver to remove the plastic clip that holds the screw.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the Phillips screw in the bottom of the door panel cup.
-
Lift the cup out of the the door panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert a very thin flathead screwdriver blade into the small gap towards the rear of the car on the plastic screw cover near the door handle.
-
Unscrew the Phillips screw underneath the screw cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the plastic cover at the base of the C-pillar by pulling it directly away from the window.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using firm pressure, pull the door panel away from the door. Start at the top right, and work down the side, across the bottom, and up the opposite side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the bottom of the door panel away from the door, and lift the entire panel off the door.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push down on the small tab and pull the connector directly away from its socket to disconnect the power lock switch.
-
Use the same method described above to remove the connector for the tweeter.
-
Press the tab on the bottom of the larger green connector to disconnect the side-view mirror controls.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the power window connector.
-
You may now remove the entire door panel.
-
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.