1998-2002 Honda Accord Distributor Cap Replacement (1998, 1999, 2000, 2001, 2002)

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

Cette étape n’est pas traduite. Aidez à la traduire

Before disconnecting the spark plug wires, be sure to trace their orientation from the individual cylinders back to the distributor cap.
The cylinders are ordered from left to right when viewing the engine from the front of the car, with cylinder #1 being closest to the passenger side of the vehicle.
Mark the order of the spark plug wires on the new distributor cap with a silver sharpie marker -- it will make reinstallation much easier.

Cette étape n’est pas traduite. Aidez à la traduire

Disconnect the four spark plug wires from the distributor cap by pulling their connectors straight away from the sockets on the distributor cap.
It may be helpful to slightly twist the wires as you pull them.

Cette étape n’est pas traduite. Aidez à la traduire

Use a 1/4" drive, 8 mm deep socket to remove the three hex bolts securing the distributor cap to the engine.
The position of the third bolt is not visible in the second picture.

Cette étape n’est pas traduite. Aidez à la traduire

Cette étape n’est pas traduite. Aidez à la traduire

Use a dental pick or a small screwdriver to gently remove the D-shaped o-ring around the distributor cap flange.
Install a new o-ring in the seal recess, making sure that it is sitting flush against the flange.