Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Begin by opening up the rear hatch door by reaching under the "Pontiac" logo and pressing on the rear hatch door button.
-
Pull on the door from the same location to open the rear hatch.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the tail light access doors on the left and right sides in the trunk compartment.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Press in on the opening tab and pull on the door to release the two clips on the left side.
-
Completely remove the access door and set it off to the side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Inside of the compartment, there is the tail light bulb at the top, and the turn signal bulb on the bottom.
-
Reach inside with your hand and grab onto the tail light bulb socket. Rotate it counter-clockwise to unseat it from the tail light and remove the socket.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Hold onto the bulb socket and gently pull out the bulb with your other hand.
-
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.
2 commentaires
How do I replace the 3rd brake light?
What about the 3rd bulb