Réparez vos affaires Communauté Boutique

ANKER SoundCore Speaker Replacement

Introduction

This is a step-be-step guide on how to replace the ANKER Soundcore speakers.

Before attempting to replace anything, it is recommended that you look at this device’s troubleshooting guide.

Faulty speakers are often the cause of poor sound quality, but are not always the problem. Check the troubleshooting guide before, for any other possible solutions to poor sound quality.

Ce dont vous avez besoin

  1. ANKER SoundCore Speaker Replacement, Speaker: étape 1, image 1 de 3 ANKER SoundCore Speaker Replacement, Speaker: étape 1, image 2 de 3 ANKER SoundCore Speaker Replacement, Speaker: étape 1, image 3 de 3

    • Use a iFixit plastic opening tool to pry off the screen.

    • Remove the screen from the device.

    Modifier

  2. ANKER SoundCore Speaker Replacement: étape 2, image 1 de 1

    • Remove the 10mm Philips #0 screws from speaker mount.

    Modifier

  4. ANKER SoundCore Speaker Replacement: étape 3, image 1 de 3 ANKER SoundCore Speaker Replacement: étape 3, image 2 de 3 ANKER SoundCore Speaker Replacement: étape 3, image 3 de 3

    • Use a spudger tool to remove speaker mount.

    • Ensure all wires are still properly attached in device.

    Modifier

  5. ANKER SoundCore Speaker Replacement: étape 4, image 1 de 3 ANKER SoundCore Speaker Replacement: étape 4, image 2 de 3 ANKER SoundCore Speaker Replacement: étape 4, image 3 de 3

    • Remove the 8mm Philips #0 screws holding speakers in place.

    Modifier

  6. ANKER SoundCore Speaker Replacement: étape 5, image 1 de 3 ANKER SoundCore Speaker Replacement: étape 5, image 2 de 3 ANKER SoundCore Speaker Replacement: étape 5, image 3 de 3

    • Pull out the speakers.

    Modifier

  7. ANKER SoundCore Speaker Replacement: étape 6, image 1 de 2 ANKER SoundCore Speaker Replacement: étape 6, image 2 de 2

    • Desolder the speaker wires.

    • Remove both of the speakers from the circuit board.

    • For help soldering and desoldering, follow this guide.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Cory Troxell

Membre depuis le 02/07/20

214 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team S22-G1, Regan Winter 2020 Membre de l'équipe Cal Poly, Team S22-G1, Regan Winter 2020

CPSU-REGAN-W20S22G1

5 membres

6 tutoriels rédigés

2 commentaires

What speaker do you replace them with?

tom mason - Réponse

I would like to buy some parts of recording of this items how do I get from y’all is there any phone number Contac anything UK

Octavio Rodrigues - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 35

30 derniers jours : 135

Total : 8,499