Aller au contenu principal

Introduction

The USB port allows you to connect other devices to the laptop. This guide will show you how to remove and replace the USB port.

Pièces

Aucune pièce spécifiée.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Use a spudger to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from the socket.
    • Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from the socket.

  5. Remove the 5mm Phillips #0 screw from the USB port. Remove the USB port from the device.
    • Remove the 5mm Phillips #0 screw from the USB port.

    • Remove the USB port from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joseph

Membre depuis le 25/01/2018

589 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team S20-G1, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 125