Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • If the display is damaged, use clear packing tape to contain any glass shards.

    • Make sure the entire surface of the display is covered with tape.

    • Wear safety glasses to protect your eyes.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 3 : étape 2, image 2 de 3 : étape 2, image 3 de 3
    • Power off your phone.

    • Remove the SIM card from the left side of the phone by pressing the small hole and allowing it to eject using the 0.8 screwdriver head.

    • Remove the two 4mm screws on the bottom of the phone using the Torx T3 screwdriver.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 3 : étape 3, image 2 de 3 : étape 3, image 3 de 3
    • Press the small suction cup just above the home button.

    • While lifting up on the suction cup insert an opening pick into the crevice between the screen and back casing to pry the screen off carefully.

    • Carefully separate the two halves to avoid tearing the volume rocker ribbon cable.

    • Using the opening tool, disconnect the volume rocker ribbon cable from the base of the phone freeing the two halves of the phone.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 4, image 1 de 1
    • Using the J000 screwdriver head, remove the three 3mm screws holding the bracket in place.

    • Remove the silver bracket that was held into place by the three screws just removed.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 5, image 1 de 1
    • Disconnect the battery connection cable by using the plastic opening tool and applying light pressure upwards on the cable.

Ligne d'arrivée

21 autres ont terminé cette réparation.

Lissandra Ilcyn

Membre depuis le 10/05/15

841 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 5-7, Maness Fall 2015 Membre de l'équipe Cal Poly, Team 5-7, Maness Fall 2015

CPSU-MANESS-F15S5G7

5 membres

10 tutoriels rédigés

14 commentaires

Tolle Anleitung DANKE!!

Leo Henn - Réponse

The replacement went exactly as presented. My stock battery had pull tabs to release the adhesive, making removal very easy. Thanks for a clear step-by-step guide.

John - Réponse

How to bay amazone fire fone battry in pakistan

Manzoor Khan - Réponse

where can i get fire phone battery in india

Shiva Sai - Réponse

where can i get fire phone battery in UAE Abu Dhabi. It's urgent..

Asheesh Barna - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 16

30 derniers jours : 38

Total : 12,858