Pièces

Aucune pièce nécessaire.

  1. As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

    Ajouter un commentaire

  2. Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Use a philips screwdriver to remove the metal heat sink.

    Ajouter un commentaire

    • The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autre(s) ont terminé cette réparation.

Vincent Monteil

Membre depuis le 06/07/2013

6 197 Réputation

19 tutoriels rédigés

Where can I find a 3rd Generation Apple TV Logic Board?

Ricky Vaughn - Réponse

Good question! Did you manage to find a replacement?

Nathan Bugeja -

Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this

Mohamed Iqbal Sayyed - Réponse

Mine too, where could I find a logic board replacement???

Juan Ignacio Gutierrez -

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 9

30 derniers jours : 45

Total : 7,155