Aller au contenu principal
  1. As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

  2. Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Use a philips screwdriver to remove the metal heat sink.
    • Use a philips screwdriver to remove the metal heat sink.

  5. The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free. The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.
    • The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.

  6. You may now be able to remove the power supply with a spudger The rating of the power supply is 3.4V at 1.75A, which is identical to the 2nd Gen Apple TV's 5.95 watts.
    • You may now be able to remove the power supply with a spudger

    • The rating of the power supply is 3.4V at 1.75A, which is identical to the 2nd Gen Apple TV's 5.95 watts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autre(s) ont terminé cette réparation.

Vincent Monteil

Membre depuis le 06/07/2013

6 229 Réputation

19 tutoriels rédigés

10 commentaires

you forgot to add the power supply is held by 2 tiny torx screw

morpheuse - Réponse

Successfully sourced a new power supply for our 3rd generation after the last one was destroyed ironically by Apple juice. Sourced from China and replaced- presto!! It's working- all for $14.95

rcbakes30 - Réponse

Where? I need on badly! Can you send me / Post here a link?

jakesterage -

please, and where could be find the part, the power supply for AppleTV 3rd generation?

foxy72 - Réponse

Hi, i have a 3rd gen Apple TV and I have problems with it, it doesn't turn on I don't now if it's the power supply or it is &&^&@@ up how can I figure out if it is the power supply and in that case where can I found one

ilichcorcegatreep - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 6

7 derniers jours : 32

30 derniers jours : 124

Total : 14,619