Réparez vos affaires Communauté Boutique

Backbone One Phone Connector Replacement

Introduction

Use this guide to replace a broken phone connector on your Backbone One.

Ce dont vous avez besoin

  1. Backbone One Phone Connector Replacement, Remove the screws: étape 1, image 1 de 1

    • Use a Phillips screwdriver to remove the four 5.9 mm-long screws.

    Modifier

  2. Backbone One Phone Connector Replacement, Rotate the upper part: étape 2, image 1 de 3 Backbone One Phone Connector Replacement, Rotate the upper part: étape 2, image 2 de 3 Backbone One Phone Connector Replacement, Rotate the upper part: étape 2, image 3 de 3

    • Lift up the upper cover of the controller.

    • Swing the upper cover over and place it on the controller case.

    • Make sure that the interconnecting cable has no tension.

    Modifier

  3. Backbone One Phone Connector Replacement, Remove the screws: étape 3, image 1 de 1

    • Use a Phillips screwdriver to remove the two 4.8 mm-long screws securing the phone connector.

    Modifier

  5. Backbone One Phone Connector Replacement, Unthread the phone connector: étape 4, image 1 de 3 Backbone One Phone Connector Replacement, Unthread the phone connector: étape 4, image 2 de 3 Backbone One Phone Connector Replacement, Unthread the phone connector: étape 4, image 3 de 3

    • Use your fingers to thread the phone connecter through the opening in the plastic cover at the right side of the rear cover.

    Modifier

  6. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: étape 5, image 1 de 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: étape 5, image 2 de 2

    • Use a pair of tweezers to disconnect the first phone connector cable from the mainboard.

    Modifier

  7. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: étape 6, image 1 de 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: étape 6, image 2 de 2

    • Use a pair of tweezers to disconnect the second phone connector cable from the mainboard.

    Modifier

  8. Backbone One Phone Connector Replacement, Remove the phone connector cable: étape 7, image 1 de 1

    • Remove the phone connector cable.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Une autre personne a terminé cette réparation.

Auteur

Adriana Zwink

Membre depuis le 12/18/19

48 052 Réputation

167 tutoriels rédigés

Badges: 35

+ 32 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 731 tutoriels rédigés

4 commentaires

Where can i buy a new part

reye_s - Réponse

Unfortunately we haven't found any replacement parts yet. If you find a website that offers replacement parts feel free to share your experience with us.

Adriana Zwink -

Where can I find the connector

Big_deppresion_time_14 Xxx - Réponse

My son bent the connector cable. Where do I buy a new one?

Please update as soon as possible!

Krystal Glavic - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 29

30 derniers jours : 135

Total : 2,416