Bissell CrossWave Cordless Max 2554A Brush Roll Replacement

Introduction

The brush roll in the Bissell CrossWave Cordless Max 2554A handles the bulk of the cleaning when the vacuum is in its mopping mode. The brush roll will get dirty from repeated cleaning and will require replacement. Frequent use can cause the roll to be damaged or not function properly. The troubleshooting guide features information about the brush roll. If the brush roll isn't working, then replacement is needed.

Étape 1 Brush Roll

Bissell CrossWave Cordless Max 2554A Brush Roll Replacement, Brush Roll: étape 1, image 1 de 2

Bissell CrossWave Cordless Max 2554A Brush Roll Replacement, Brush Roll: étape 1, image 2 de 2

Locate the handle of the brush roll cover situated at the top of the clear plastic piece.

Modifier

Étape 2

Firmly pull up on the handle until the cover pops off.
The cover will rotate slightly around the bottom of the plastic, but will not stop the piece from being removed.

Modifier