Introduction
The cutter is located inside the machine so some disassembly is required. The cutter is sharp, use caution when handling it.
-
-
-
To access the cutter, follow steps 1-3 in the Disassembly Guide.
Demander à FixBot
-
-
-
-
Place a hand on each side of the cutter and firmly pull vertically up.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
USF Tampa, Team 5-5, Blackwell Fall 2015 Membre de l'équipe USF Tampa, Team 5-5, Blackwell Fall 2015
USFT-BLACKWELL-F15S5G5
3 membres
12 tutoriels rédigés
