Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
In this guide we will replace the power cord and the transformer The transformer is the large, heavy device that converts the relatively high 220V input voltage into a lower voltage for the amplifier.
Ce dont vous avez besoin
-
-
-
Carefully de-solder ends of power cord from circuit board.
-
Keep track of the colors of the cords. The brown cord leads to the L on the circuit board, and this cord will lead to a fuse in the power plug. The blue cord leads to the N on the board.
-
Finally, pull the power cord through the rear panel to completely remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.