Aller au contenu principal

Canon Powershot A70 Rear Exterior Panel Replacement

Ce dont vous avez besoin

  1. Canon Powershot A70 Rear Exterior Panel Replacement, Rear Exterior Panel: étape 1, image 1 de 1
    • Unscrew the three small screws on the bottom of the camera.

    • Remove the wrist strap.

  2. Canon Powershot A70 Rear Exterior Panel Replacement: étape 2, image 1 de 1
    • Remove the screw in the CF compartment.

  3. Canon Powershot A70 Rear Exterior Panel Replacement: étape 3, image 1 de 3 Canon Powershot A70 Rear Exterior Panel Replacement: étape 3, image 2 de 3 Canon Powershot A70 Rear Exterior Panel Replacement: étape 3, image 3 de 3
    • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with the IFIXIT opening tool.

    • Carefully pull out the battery with two fingers.

    • Remove the two screws that are now visible.

  4. Canon Powershot A70 Rear Exterior Panel Replacement: étape 4, image 1 de 2 Canon Powershot A70 Rear Exterior Panel Replacement: étape 4, image 2 de 2
    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  5. Canon Powershot A70 Rear Exterior Panel Replacement: étape 5, image 1 de 1
    • The interior of the camera should look like this.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Shalan Ertis

Membre depuis le 01/26/10

68 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 14-40, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 14-40, Regan Winter 2010

CPSU-REGAN-W10S14G40

5 membres

15 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 3,240