Réparez vos affaires Communauté Boutique

Circular Saw Blade Replacement

Introduction

Whether your circular saw blade is worn out, or you just want to switch it out for a different style, it’s really easy to swap out blades on pretty much any circular saw—and it takes just a few minutes.

This guide uses a Ryobi P504G circular saw, but the process is very similar for most circular saws.

Ce dont vous avez besoin

  1. Circular Saw Blade Replacement, Blade: étape 1, image 1 de 2 Circular Saw Blade Replacement, Blade: étape 1, image 2 de 2

    • Unplug your circular saw or remove the battery before replacing the blade!

    Modifier

  2. Circular Saw Blade Replacement: étape 2, image 1 de 3 Circular Saw Blade Replacement: étape 2, image 2 de 3 Circular Saw Blade Replacement: étape 2, image 3 de 3

    • Press and hold down the blade lock button to keep the blade from turning while you loosen it.

    • Loosen the arbor's hex bolt in the center of the blade using a 5mm hex key, making sure to loosen clockwise since the bolt threads are reversed.

    • Your circular saw may already come with a hex key.

    Modifier

  3. Circular Saw Blade Replacement: étape 3, image 1 de 2 Circular Saw Blade Replacement: étape 3, image 2 de 2

    • Once loosened, continue unscrewing the bolt with your fingers and remove it from the saw.

    Modifier

  5. Circular Saw Blade Replacement: étape 4, image 1 de 2 Circular Saw Blade Replacement: étape 4, image 2 de 2

    • Remove the arbor washer.

    Modifier

  6. Circular Saw Blade Replacement: étape 5, image 1 de 3 Circular Saw Blade Replacement: étape 5, image 2 de 3 Circular Saw Blade Replacement: étape 5, image 3 de 3

    • Completely retract the blade guard.

    • You can hold the blade guard in place with a clamp while you change the blade.

    Modifier

  7. Circular Saw Blade Replacement: étape 6, image 1 de 3 Circular Saw Blade Replacement: étape 6, image 2 de 3 Circular Saw Blade Replacement: étape 6, image 3 de 3

    • Set the circular saw on its side and carefully lift up the blade to unseat it from the arbor.

    • Slowly slide out the blade.

    • Use extreme caution when handling the blade!

    Modifier

  8. Circular Saw Blade Replacement: étape 7, image 1 de 1

    • When inserting the new blade, be sure to note its rotation and install it in the correct orientation.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

Craig Lloyd

Membre depuis le 02/10/16

35 418 Réputation

82 tutoriels rédigés

Badges: 41

+ 38 badges supplémentaires

3 commentaires

Hello!
I learned a lot of important things, but I have a Question that is this Circular Saw perfect to cut Concrete Pavers?

F6 Adhesive Tape - Réponse

I think you need a cutting disc in your circular saw

to cut concrete.

Toon Konings - Réponse

the problem is that cutting concrete with a concrete disk produces a lot of concrete dust. It will kill your machine. It is not possible to stop the dust by pouring water as you would do with a tile cutting machine.

vief - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 10

7 derniers jours : 66

30 derniers jours : 287

Total : 6,741