Réparez vos affaires Communauté Boutique

Compaq Evo N1000v Top Cover Replacement

Introduction

A guide on how to remove the Top Cover.

Ce dont vous avez besoin

  1. Compaq Evo N1000v Top Cover Replacement, LED Cover: étape 1, image 1 de 1

    • Flip the laptop over with the rear panel facing forward.

    Traduire

  2. Compaq Evo N1000v Top Cover Replacement: étape 2, image 1 de 1

    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

    Traduire

  3. Compaq Evo N1000v Top Cover Replacement: étape 3, image 1 de 1

    • Flip the laptop back over with the front facing forward. Open the screen.

    Traduire

  4. Compaq Evo N1000v Top Cover Replacement: étape 4, image 1 de 1

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    Traduire

  5. Compaq Evo N1000v Top Cover Replacement: étape 5, image 1 de 1

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Traduire

  6. Compaq Evo N1000v Top Cover Replacement: étape 6, image 1 de 1

    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

    Traduire

  7. Compaq Evo N1000v Top Cover Replacement: étape 7, image 1 de 1

    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

    Traduire

  8. Compaq Evo N1000v Top Cover Replacement: étape 8, image 1 de 2 Compaq Evo N1000v Top Cover Replacement: étape 8, image 2 de 2

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

    Traduire

  9. Compaq Evo N1000v Top Cover Replacement, Keyboard: étape 9, image 1 de 1

    • Lift the back edge of the keyboard and pull towards the screen.

    Traduire

  11. Compaq Evo N1000v Top Cover Replacement: étape 10, image 1 de 1

    • Pull the cable and lift up to release.

    Traduire

  12. Compaq Evo N1000v Top Cover Replacement: étape 11, image 1 de 1

    • Remove the keyboard.

    Traduire

  13. Compaq Evo N1000v Top Cover Replacement, Heat Sink: étape 12, image 1 de 1

    • Disconnect the cable connecting the fan to the system board.

    Traduire

  14. Compaq Evo N1000v Top Cover Replacement: étape 13, image 1 de 1

    • Remove the four screws from the heat sink.

    Traduire

  15. Compaq Evo N1000v Top Cover Replacement: étape 14, image 1 de 1

    • Pull the the heat sink up and out of the computer.

    Traduire

  16. Compaq Evo N1000v Top Cover Replacement, Palm Rest: étape 15, image 1 de 1

    • Close the laptop and flip it so the rear panel is facing up.

    Traduire

  17. Compaq Evo N1000v Top Cover Replacement: étape 16, image 1 de 1

    • Using the TR8 Torx screwdriver, remove the six screws from the back case.

    Traduire

  18. Compaq Evo N1000v Top Cover Replacement: étape 17, image 1 de 1

    • Remove the battery.

    • Remove the screw from the metal support on the case edge with a Torx T8 screwdriver.

    • Flip the laptop over again so the top is facing up.

    • Open the laptop screen and face it towards you.

    Traduire

  19. Compaq Evo N1000v Top Cover Replacement: étape 18, image 1 de 1

    • Lift the the palm rest up from the front edge of the laptop and swing it towards the screen.

    • Be gentle as it is connected by some cables.

    Traduire

  20. Compaq Evo N1000v Top Cover Replacement: étape 19, image 1 de 1
    Traduire

  21. Compaq Evo N1000v Top Cover Replacement: étape 20, image 1 de 1

    • Disconnect the second ribbon cable.

    Traduire

  22. Compaq Evo N1000v Top Cover Replacement: étape 21, image 1 de 1

    • Remove the palm rest.

    Traduire

  23. Compaq Evo N1000v Top Cover Replacement, Top Cover: étape 22, image 1 de 1

    • Turn the base bottom side up.

    Traduire

  24. Compaq Evo N1000v Top Cover Replacement: étape 23, image 1 de 1

    • Remove the two TM 2.5mm x 8.0mm screws that secure the top cover to the base.

    Traduire

  25. Compaq Evo N1000v Top Cover Replacement: étape 24, image 1 de 1

    • Turn the base top side up with the front facing forward.

    Traduire

  26. Compaq Evo N1000v Top Cover Replacement: étape 25, image 1 de 1

    • Remove the three TM 2.5 mm x 5.0 mm screws that secure the top cover to the base.

    Traduire

  27. Compaq Evo N1000v Top Cover Replacement: étape 26, image 1 de 1

    • Lift the top cover straight up about one inch, then slide forward until the microphone cable is exposed.

    • Disconnect the microphone cable from the system board.

    Traduire

  28. Compaq Evo N1000v Top Cover Replacement: étape 27, image 1 de 1

    • Remove the top cover from the base.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Alex Hernandez

Membre depuis le 04/14/10

46 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team 29-74, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-74, Johann Spring 2010

CPSU-JOHANN-S10S29G74

3 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 17

Total : 3,079