Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
You are going to be starting from the handle and working your way to the head of the dryer in this disassembly.
Ce dont vous avez besoin
-
-
Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
-
-
-
Remove the inner white disk piece by gently pulling it out with your finger nail.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.