Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to gently remove the back panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The battery must be removed to access the mouse pad. To remove the battery, undo the two, 2mm screws located on each side.
-
Once all four screws are removed, unplug the battery connection cable by hand to disconnect the battery from the motherboard.
-
To remove the battery, lift up on one side to get you fingers underneath and lift away.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 2mm screws located around the maouse pad cover.
-
Using either fingernails or tweezers, lift the black cover on the ribbon cable and pull the cable loose from he motherboard.
-
Once the ribbon cable is disconnected lift up on the back cove to remove it and expose the mouse pad.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Now that the mouse pad is exposed, lift the assembly to remove the mouse pad.
-