Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
First, disassemble the device, taking off the top and bottom panels. See the disassembly guide for further directions.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the internal components out of the case.
-
If the device has a lot of dirt on the internal components, this may be the cause of the screen malfunction. Reassemble device at this point to see if it has fixed the problem.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect side clips of screen to detach the base of it from the main circuit board, using the metal spudger.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully pull the screen up so that it is only attached at the top side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To replace, purchase a new screen and locate the small silver bar located on the motherboard.
-
Insert the end of the new screen into the opening of the silver bar, securing it in there to hold your new screen.
-
After the device is assembled, power the device on. The issue should be repaired.
-
If the device screen is still defective, an issue with the motherboard or a greater malfunction could be the cause.
-