Aller au contenu principal

Ce dont vous avez besoin

  1. Dell DJ Disassembly, Dell DJ Disassembly: étape 1, image 1 de 3 Dell DJ Disassembly, Dell DJ Disassembly: étape 1, image 2 de 3 Dell DJ Disassembly, Dell DJ Disassembly: étape 1, image 3 de 3
    • Inspect your device and be sure that it matches the device that this guide is disassembling.

    • Familiarize yourself with the specific design of the device.

    • Battery replacement is the only repair that our guide offers that does not require a complete tear down.

  2. Dell DJ Disassembly: étape 2, image 1 de 3 Dell DJ Disassembly: étape 2, image 2 de 3 Dell DJ Disassembly: étape 2, image 3 de 3
    • Remove the bottom panel with the metal spudger. This panel may be fused to the outer shell with a dot of adhesive.

    • Four screws fasten a metal plate to the device. Using the device magnetic mat and 54 bit (Phillips J000) driver, remove the screws.

    • Be sure to keep the 4mm screws together and organized on the device magnet plate.

  3. Dell DJ Disassembly: étape 3, image 1 de 3 Dell DJ Disassembly: étape 3, image 2 de 3 Dell DJ Disassembly: étape 3, image 3 de 3
    • The top plate of the device is attached by a dot of glue. Use the metal spudger to pry the plate off.

    • After the top plate is removed, remove the four 4mm screws that attach the inner plate.

    • When the plate is removed, the motherboard will be ready to be removed.

  4. Dell DJ Disassembly: étape 4, image 1 de 3 Dell DJ Disassembly: étape 4, image 2 de 3 Dell DJ Disassembly: étape 4, image 3 de 3
    • Slide the motherboard out of the protective case.

    • Be careful not to snag any wires.

    • When the motherboard is exposed the device is ready to be inspected and repaired.

Ligne d'arrivée

Une autre personne a terminé cette réparation.

William Abel

Membre depuis le 28/01/2016

164 Réputation

1 tutoriel rédigé

Équipe

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016 Membre de l'équipe USF Sarasota-Manatee, Team 1-1, Stewart Spring 2016

USFSM-STEWART-S16S1G1

3 membres

5 tutoriels rédigés

Un commentaire

How did you get the logic board to slide past the scroll wheel ?

kf4qic - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 12

Total : 472