Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    • CAUTION: Before performing these procedures, disconnect the modem from the telephone wall jack. If you remove the battery while the system is powered on and power cable is connected to an electrical outlet and then reinstall the battery and disconnect the power cable within one and a half seconds, the system may shut down.

    • NOTICE: Do not replace the battery with the computer in standby mode.

    • Ensure that the computer is turned off, set to the hibernate power management mode, or connected to an electrical outlet

  2. Cette étape n’est pas traduite. Aidez à la traduire

    • Slide and hold the battery bay latch release on the bottom of the computer, and then remove the battery from the bay.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    • To install the battery, slide the battery into the bay until the latch release clicks, it can be slid in easiest by sliding and holding the latch release while inserting the battery.

Ligne d'arrivée

3 autres ont terminé cette réparation.

irlanda

Membre depuis le 11/30/17

11 336 Réputation

2 tutoriels rédigés

Équipe

RampUP America, Inc. Membre de l'équipe RampUP America, Inc.

Community

42 membres

1 985 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 212