Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

In this guide, you will learn how to disassemble the motor housing cover.

  1. Using a spudger, gently pry off the aluminum drip ring. Using a spudger, gently pry off the aluminum drip ring.
    • Using a spudger, gently pry off the aluminum drip ring.

  2. Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.
    • Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.

  3. Using a spudger, pry the planetary gear cover from the mixer shaft. Using a spudger, pry the planetary gear cover from the mixer shaft.
    • Using a spudger, pry the planetary gear cover from the mixer shaft.

  4. Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète

    Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète
  5. Using a flathead screwdriver, remove the five 28 mm front motor housing screws.
    • Using a flathead screwdriver, remove the five 28 mm front motor housing screws.

    • Using the same flathead screwdriver, remove the two 28 mm locking screws.

    • One of the locking screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

  6. Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.
    • Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.

    • One of the rear motor housing screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

  7. Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover. The rear cover is now completely free from the mixer.
    • Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover.

    • The rear cover is now completely free from the mixer.

  8. Carefully pull the power cord from the notch in back of the mixer. The motor housing cover is now completely free from the base of the mixer.
    • Carefully pull the power cord from the notch in back of the mixer.

    • The motor housing cover is now completely free from the base of the mixer.

  9. Lift the motor housing cover from the mixer base.
    • Lift the motor housing cover from the mixer base.

    • Be sure to place the cover upside-down to prevent grease from leaking out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

13 autre(s) ont terminé cette réparation.

Chris Gonzales

Membre depuis le 12/10/2014

1 015 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 14-28, Maness Fall 2014 Membre de l'équipe Cal Poly, Team 14-28, Maness Fall 2014

CPSU-MANESS-F14S14G28

4 membres

12 tutoriels rédigés

14 commentaires

Well fine job! Just finished and t works!!!

James Anderson - Réponse

Instruccion is exelent but I veleave the problem is electric. can you give aidea. dhe machine does’nt work at all

Aristides Aleman - Réponse

Thank you! I'm repainting my white mixer a deep cherry red gloss to match my kitchen. These mixers can last 20+ years, if you take care of them. But, who wants the same color kitchen for that long? Bonus: saved $50+ by painting it the color I wanted, rather than pay the extra for a mixer from the colored choices.

Heather Schrader - Réponse

Do the motor housing sometimes become to hard to remove? I followed all the steps yet it still acts as if something inside the housing is keeping it from coming off.

Royce M - Réponse

Nothing else, only the planetary assembly, and the 9 big housing screws. Once those are off, it can take a lot of jiggling and persistence, mostly because there’s a vacuum between the vertical shaft and the bushing inside. Remember to loosen the cord in case to prevent yanking it accidentally when the cover comes off.

Ariel Cornejo -

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 84

7 derniers jours : 316

30 derniers jours : 1,819

Total : 38,897