Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.
-
Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the battery off the motherboard for enough clearance to access the battery connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully pull the battery connector away from its socket on the motherboard.
-
Annulation : je n'ai pas terminé ce tutoriel.
147 autres ont terminé cette réparation.
16 commentaires
Try Amazon Cody
whats is amazon cody?