Introduction
Use this guide to replace the speaker module in your Fairphone 3.
Ce dont vous avez besoin
-
-
-
Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom right of the back cover.
-
Pry the back cover up to start separating its plastic clips.
Demander à FixBot
-
-
-
Slide around the bottom right corner of the back cover to loosen the lower plastic clips.
-
Lift the back cover to release the rest of the plastic clips and remove it.
-
-
-
-
-
Use a fingernail or a prying tool at the marked notch to lever the battery out of its recess.
-
Lever the battery up until you can get a good grip.
-
-
-
-
-
Remove the thirteen Phillips #00 screws (4 mm length).
-
-
-
-
Insert an opening pick between the midframe and the display module on the right edge of the phone.
-
Slide the opening pick down to the bottom right corner to pry open the plastic clamps of the display module.
-
-
-
Slide the opening pick around the bottom right corner and use it to disengage the plastic clamps at the bottom of the display module.
-
-
-
Slide the opening pick along the left side to pry the display module up.
-
-
-
-
-
Use a spudger to pry up and disconnect the bottom module connecting cable.
-
-
To reassemble your device, follow these instructions in reverse order.
Information on what to do with the old module can be found on the FairPhone support page and in the FairPhone forum.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.
2 commentaires de tutoriel
Super einfach, danke für die tollen Bilder.
Ich hab dies nur gemacht um das Phone mal wieder von Staub zu befreien, vor allem bei den Lautsprecheröffnungen hat sich einiges angesammelt.
Ein “Frühjahrsputz” ist bei diesem Gerät tatsächlich eine Option :)
