Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

If you don't like the cracked look of your GoPro faceplate, it may be time to give it a makeover. See how to replace it in under a minute!

  1. Using a plastic opening tool, pry the gray, front face plate until it can be removed from the housing. To avoid breaking or weakening the tabs on the face plate which hold it in place, alternate the sides from which you pry and check each tab before separating the plate from the body.
    • Using a plastic opening tool, pry the gray, front face plate until it can be removed from the housing.

    • To avoid breaking or weakening the tabs on the face plate which hold it in place, alternate the sides from which you pry and check each tab before separating the plate from the body.

Conclusion

To reassemble your device, press face plate back on with hands.

Une autre personne a terminé cette réparation.

Nathan Braham

Membre depuis le 14/04/2015

110 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 6-15, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 6-15, Maness Spring 2015

CPSU-MANESS-S15S6G15

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 1,369