Réparez vos affaires

Droit à la réparation

Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Handspring Visor Edge Screen Replacement

Rédigé par : Christian Valoria (et 4 autres contributeurs)
  • Commentaires : 0
  • Favoris : 0

Difficulté

Modérée

Étapes

9

Temps nécessaire

15 minutes

Sections

3

Drapeaux

2

Confusing Text

Texte bizarre

Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifiez-les pour les rendre plus claires !

Missed a Step

Une étape a été sautée

Oups ! Il manque encore des étapes importantes à ce tutoriel.

Introduction

We will gain access to the screen, enabling us to replace it with a new screen.

  1. Place Visor Edge face down. Notice the tab connecting the flip cover to the back of the PDA.

    • Place Visor Edge face down.

    • Notice the tab connecting the flip cover to the back of the PDA.

    • Gently push tab forward.

    • Do not pull on the flip cover in an attempt to remove it from the PDA.

    Traduire

  2. Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

    Traduire

  3. Remove the black plate from the PDA.

    • Remove the black plate from the PDA.

    Traduire

  5. Remove four 2.6 mm Philips screws that are on the sides of the frame. Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

    • Remove four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

    Traduire

  6. Remove the four 2.6 mm Philips screws on the top and bottom of the frame. Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

    Traduire

  7. Remove the white frame from the PDA.

    • Remove the white frame from the PDA.

    • The frame may get stuck on the corners so be very gentle when working the corners off.

    Traduire

  8. Pull front cover off gently.

    • Pull front cover off gently.

    Traduire

  9. With the device flipped over, use the tweezers to remove the ribbon cable attaching the screen to the circuit board. With the device flipped over, use the tweezers to remove the ribbon cable attaching the screen to the circuit board.

    • With the device flipped over, use the tweezers to remove the ribbon cable attaching the screen to the circuit board.

    Traduire

  10. Wedge the spudger in between the glass and the metal frame. Slide the spudger down the length of the screen to detach from the frame.

    • Wedge the spudger in between the glass and the metal frame.

    • Slide the spudger down the length of the screen to detach from the frame.

    • With your hands, pry the screen up from the detached side, and the screen will pop off.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Christian Valoria

Membre depuis le 23/01/2011

225 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 11-28, Maness Winter 2011 Membre de l'équipe Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 1,314