Introduction
This guide will walk you through how to replace a faulty or wobbly kickstand on a Hover-1 Eagle scooter. You should replace your kickstand if your kickstand is defective, wobbly, or not the proper length. To determine if you need to replace your kickstand, refer to our Troubleshooting Guide.
Ce dont vous avez besoin
-
-
Remove the two 6mm axle screws using a hex bit 4.0.
-
Remove the kickstand from the scooter.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
Cal Poly, Team S1-G2, White Winter 2020 Membre de l'équipe Cal Poly, Team S1-G2, White Winter 2020
CPSU-WHITE-W20S1G2
4 membres
6 tutoriels rédigés
