Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

With the diffused application of Face ID on iPhone X – 11 series, Face ID failure also appears at a high frequency. As our previous Face ID teardown video has introduced, Face ID can be easily damaged and hardly repaired. If the problem is related to the flex cable, then it’s simple. However, based on statistics of REWA chip-level motherboard repair service, Face ID failure is caused by damage of the Flood illuminator/Dot Projector in most cases, which can not be repaired.

Vidéo d'introduction

  1. The phone keeps sending messages: ‘move iPhone a little lower/higher’ during the setting up process of Face ID.
    • The phone keeps sending messages: ‘move iPhone a little lower/higher’ during the setting up process of Face ID.

  2. Based on REWA exclusive repair tricks, let’s start with the Flood Illuminator. In our daily repair work, we can test the Proximity Sensor and the Ambient Light Sensor to confirm whether the Flood Illuminator is working normally.
    • Based on REWA exclusive repair tricks, let’s start with the Flood Illuminator.

    • In our daily repair work, we can test the Proximity Sensor and the Ambient Light Sensor to confirm whether the Flood Illuminator is working normally.

    • Let’s make a phone call to confirm whether the Proximity Sensor is working. The Proximity Sensor works normally.

  3. Next, test the Ambient Light Sensor. The Ambient Light Sensor is also working normally.
    • Next, test the Ambient Light Sensor. The Ambient Light Sensor is also working normally.

    • Judging by this, the Face ID failure is not caused by Flood Illuminator.

  4. Essential Electronics Toolkit

    Petit kit. Grandes possibilités.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  5. Let’s move on to the next step of Face ID troubleshooting – test the front camera parts.
    • Let’s move on to the next step of Face ID troubleshooting – test the front camera parts.

    • Open the camera app and swipe to Portrait Mode. The background is not blurred, which is abnormal.

  6. At the Portrait Mode, there is no flashing red light from the Dot Projector.
    • At the Portrait Mode, there is no flashing red light from the Dot Projector.

    • We can confirm now that the Dot Projector has malfunctioned.

    • This is the fault and the problem cannot be fixed.

  7. The three parts ( infrared camera, flood illuminator and dot projector) are paired to the phone. Damage of any one of them can cause Face ID failure and such an issue is irreparable.
    • The three parts ( infrared camera, flood illuminator and dot projector) are paired to the phone. Damage of any one of them can cause Face ID failure and such an issue is irreparable.

Conclusion

Right now, Face ID failure has become a common problem in our daily repair work. Whether the problem you are dealing with can be repaired or not is really an important thing for repair technicians. Don’t worry! REWA exclusive repair tricks on Face ID troubleshooting can be a great reference for repair technicians to find out faulty positions and improve repair efficiency.

To fully understand Face ID, you can also check Face ID Teardown here.

6 autre(s) ont terminé cette réparation.

Phryne

Membre depuis le 17/11/2019

7 145 Réputation

52 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 51

7 derniers jours : 404

30 derniers jours : 1,900

Total : 5,459