Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

While applying perfume, one may press down too hard causing the nozzle or sprayer to be jammed. This repair project involves a step-by-step procedure guide on how to fix a jammed nozzle on a perfume bottle. Hence, this repair requires you take extra safety precautions when removing the nozzle because the bottle is made of glass which can break easily if not gently handled.

Outils

Pièces

Aucune pièce spécifiée.

  1. Obtain the damaged perfume bottle and a pair of pliers.
    • Obtain the damaged perfume bottle and a pair of pliers.

  2. Remove  the nozzle from the bottle by taking the pliers and unscrewing the nozzle counter clockwise. If the bottle is made from glass, untwist the nozzle from the bottle gently and slowly as much as possible to avoid the bottle from being damaged.
    • Remove the nozzle from the bottle by taking the pliers and unscrewing the nozzle counter clockwise.

    • If the bottle is made from glass, untwist the nozzle from the bottle gently and slowly as much as possible to avoid the bottle from being damaged.

    • Turning the nozzle counter clockwise means you're turning it from left to right.

  3. Using your hand, gently pull out the tube so that the metal ball is exposed. Using your hand, gently pull out the tube so that the metal ball is exposed.
    • Using your hand, gently pull out the tube so that the metal ball is exposed.

  4. Obtain a sewing needle and insert into the opening to adjust the metal ball that is stuck in the spring. The reason why the nozzle of the perfume bottom is jammed is because the metal ball is stuck in the spring. This error prevents the pump from retracting. The metal ball is supposed to be directly at the bottom of the spring which allows the pump to retract and the product to protrude out of the bottle when you press down on the nozzle.
    • Obtain a sewing needle and insert into the opening to adjust the metal ball that is stuck in the spring.

    • The reason why the nozzle of the perfume bottom is jammed is because the metal ball is stuck in the spring. This error prevents the pump from retracting. The metal ball is supposed to be directly at the bottom of the spring which allows the pump to retract and the product to protrude out of the bottle when you press down on the nozzle.

  5. Using your hands, insert the tube back into the opening. Using your hands, insert the tube back into the opening.
    • Using your hands, insert the tube back into the opening.

  6. Insert the sewing needle into the small opening to make sure that there is no clogging within the opening. Insert the sewing needle into the small opening to make sure that there is no clogging within the opening.
    • Insert the sewing needle into the small opening to make sure that there is no clogging within the opening.

  7. Using the pliers, gently twist the jammed nozzle in a clockwise motion until the pump pops up.
    • Using the pliers, gently twist the jammed nozzle in a clockwise motion until the pump pops up.

  8. Using your hands, screw the nozzle back on to the nozzle  clockwise.
    • Using your hands, screw the nozzle back on to the nozzle clockwise.

    • Turning the nozzle clockwise means you're turning it in the opposite direction (right to left).

  9. Test the newly unjammed nozzle to see if the product projects out effectively.
    • Test the newly unjammed nozzle to see if the product projects out effectively.

Conclusion

To reassemble the perfume bottle, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Tiera Forde

Membre depuis le 20/01/2019

215 Réputation

1 tutoriel rédigé

Équipe

USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019 Membre de l'équipe USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019

USFSM-STEWART-S19S1G1

18 membres

20 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 76

7 derniers jours : 572

30 derniers jours : 2,090

Total : 23,307