Aller au contenu principal

Jumper Angelsounds JPD-100S Motherboard Replacement

Ce dont vous avez besoin

  1. Jumper Angelsounds JPD-100S Motherboard Replacement, Motherboard: étape 1, image 1 de 1
    • Access the battery compartment

    • Remove the battery compartment lid and set it aside.

    • Disconnect the battery and set it aside.

  2. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 2, image 1 de 2 Jumper Angelsounds JPD-100S Motherboard Replacement: étape 2, image 2 de 2
    • Puncture the sticker in the battery compartment with a spudger to access the screw beneath it.

  3. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 3, image 1 de 1
    • Remove the 7mm Phillips #1 screw from the battery compartment.

    • Place the screw in a secure place.

  4. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 4, image 1 de 2 Jumper Angelsounds JPD-100S Motherboard Replacement: étape 4, image 2 de 2
    • Begin prying open the device.

    • Insert a plastic opening tool into the side groove about 2cm from the pink plastic component and pry open one side of the device.

    • Once the side is separated, leave the opening tool inside to prevent the two sides from closing.

  5. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 5, image 1 de 2 Jumper Angelsounds JPD-100S Motherboard Replacement: étape 5, image 2 de 2
    • Insert another plastic opening tool into the groove opposite to the side of the tool already inserted.

    • Create separation on that side until the white plastic component comes off entirely.

    • Place the white plastic component in a secure place.

  6. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 6, image 1 de 1
    • With your hand, remove the pink component.

  7. Jumper Angelsounds JPD-100S Motherboard Replacement: étape 7, image 1 de 1
    • Remove the 7mm Phillips #1 screw in the middle of the motherboard.

Ligne d'arrivée

Deron Rogers

Membre depuis le 08/31/15

271 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 6-1, Remmell Fall 2015 Membre de l'équipe USF Tampa, Team 6-1, Remmell Fall 2015

USFT-REMMELL-F15S6G1

6 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 215