Introduction
The seat on a Ninja 300 is only held in place by a couple of bolts, but small body panels need to be removed first, making the removal process a bit more cumbersome. Luckily, it’s pretty easy and just requires some basic tools.
Ce dont vous avez besoin
-
-
Locate the bolt holding the side seat cover in place and remove it using a 4mm hex key.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.