Introduction

Adjusting the beater head is a simple process involving only some handling of a screwdriver.

Pièces

Aucune pièce nécessaire.

Lift the mixer arm and locate the large screw where the base meets the arm.
  • Lift the mixer arm and locate the large screw where the base meets the arm.

  • Using a flathead screwdriver, turn the screw counter-clockwise to raise the beater head or turn it clockwise to lower the beater head.

  • The beater head should pass only about 1/16th of an inch above the base of the bowl. One good way to get the height right is to place a dime in the bowl and adjust the height until the beater head barely brushes the dime as it passes.

Thank you! Problem solved!!!

mirdel - Réponse

Conclusion

Once your beater head is at the appropriate height, you're good to go.

2 autre(s) ont terminé cette réparation.

Markus Gemperle

Membre depuis le 13/10/2014

468 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 14-28, Maness Fall 2014 Membre de l'équipe Cal Poly, Team 14-28, Maness Fall 2014

CPSU-MANESS-F14S14G28

4 membres

12 tutoriels rédigés

Very helpful. Thank you for the info, it worked!!

suz - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 22

30 derniers jours : 67

Total : 3,154