Introduction

If nothing occurs on the screen when you press on the keys, then the keyboard may be faulty. To replace the keyboard, follow the provided guide to fix the faulty keyboard.

  1. Use the plastic opening tool to pry the keyboard up and away from the bottom assembly.
    • Use the plastic opening tool to pry the keyboard up and away from the bottom assembly.

  2. Next disconnect the keyboard cable by using the tip of the spudger or your finger to lightly push out the ribbon from the contact port.
    • Next disconnect the keyboard cable by using the tip of the spudger or your finger to lightly push out the ribbon from the contact port.

    • Completely remove the keyboard from the bottom assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler

Membre depuis le 17/10/2018

303 Réputation

3 tutoriels rédigés

Équipe

UW Tacoma, Team S1-G5, Rose Fall 2018 Membre de l'équipe UW Tacoma, Team S1-G5, Rose Fall 2018

UWT-ROSE-F18S1G5

4 membres

8 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 42

Total : 58