Aller au contenu principal

Introduction

If keys are unresponsive or the whole keyboard is unresponsive you will most likely need to replace the keyboard for your Lenovo ThinkPad T440p. Replacing the keyboard can be quite tedious but will mainly consist of unscrewing screws and using your spudger to lift and remove cables. When removing the plastic cover, remove carefully.

  1. Flip the laptop so that the back is facing up.
    • Flip the laptop so that the back is facing up.

  2. Slide the battery latches to the unlocked position. Slide the battery latches to the unlocked position.
    • Slide the battery latches to the unlocked position.

  3. Slide the battery pack out of the battery slot. Slide the battery pack out of the battery slot.
    • Slide the battery pack out of the battery slot.

  4. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws. Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws.
    • Using the spudger, move the plastic protector by pressing it down and forward in order to uncover the screws.

  5. Don't remove the screws; just loosen them. Unscrew the six screws that are attached to the keyboard by using a Phillips #00 screwdriver.
    • Don't remove the screws; just loosen them.

    • Unscrew the six screws that are attached to the keyboard by using a Phillips #00 screwdriver.

  6. Use the spudger to lift the keyboard. Use the spudger to lift the keyboard. Use the spudger to lift the keyboard.
    • Use the spudger to lift the keyboard.

  7. Turn the keyboard over. Turn the keyboard over.
    • Turn the keyboard over.

  8. Use the spudger to detach the plastic protection. Use the spudger to detach the plastic protection. Use the spudger to detach the plastic protection.
    • Use the spudger to detach the plastic protection.

  9. Use the spudger to disconnect the cables. Use the spudger to disconnect the cables. Use the spudger to disconnect the cables.
    • Use the spudger to disconnect the cables.

  10. Remove the keyboard.
    • Remove the keyboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Christian Abad

Membre depuis le 20/03/2019

1 102 Réputation

7 tutoriels rédigés

Équipe

UMass Dartmouth, Team S6-G5, Peak Spring 2019 Membre de l'équipe UMass Dartmouth, Team S6-G5, Peak Spring 2019

UMASSD-PEAK-S19S6G5

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 16

30 derniers jours : 70

Total : 3,437