Aller au contenu principal

Introduction

This guide is useful for replacement of defective or nonchargeable batteries. Battery removal is also essential prior to removal of any connected hardware. Removing the battery can help protect the person and computer from electrical harm during the replacement of other hardware.

  1. Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.
    • Remove the ten 3.3 mm screws from the base cover using the T5 Torx screwdriver.

  2. Slide opening tool between the base and back cover.
    • Slide opening tool between the base and back cover.

  3. Lift back cover.
    • Lift back cover.

  4. Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.
    • Remove the four 3.5 mm screws around the battery using the Phillips 00 screwdriver.

  5. Disconnect the battery from the motherboard.
    • Disconnect the battery from the motherboard.

  6. Gently lift and remove the battery.
    • Gently lift and remove the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Stephanie Alexander

Membre depuis le 28/09/2017

436 Réputation

3 tutoriels rédigés

Équipe

University of Maine, Team S1-G5, Diaz Fall 2017 Membre de l'équipe University of Maine, Team S1-G5, Diaz Fall 2017

UMAINE-DIAZ-F17S1G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 8

7 derniers jours : 55

30 derniers jours : 263

Total : 4,079