Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
You can change the battery by opening up the GPS.
Ce dont vous avez besoin
-
-
Remove the four rubber caps from the back by using the Phillips #00 screwdriver.
-
-
-
-
Disconnect the battery connector from the circuit board.
-
Pry the battery off the circuit board. The adhesive attaching it shouldn't require any other tools.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.