Aller au contenu principal

Introduction

If your kickstand has worn out or broken and is no longer supporting your device, use this guide to replace it. You may need to replace the kickstand due to normal wear-and-tear or an accidental drop. The process is very simple and doesn’t require taking the Surface Pro 3 apart. You’re just removing and replacing the kickstand itself.

  1. Lift the kickstand  to a 90º angle to expose the hinge screws.
    • Lift the kickstand to a 90º angle to expose the hinge screws.

  2. Remove the four 3.5 mm T5 screws—two on each side. Remove the four 3.5 mm T5 screws—two on each side.
    • Remove the four 3.5 mm T5 screws—two on each side.

  3. Wiggle the kickstand gently back and forth to disengage the two lightly-adhered tabs connecting the center of the kickstand to the main body. Remove the kickstand from the back cover of the Surface Pro 3.
    • Wiggle the kickstand gently back and forth to disengage the two lightly-adhered tabs connecting the center of the kickstand to the main body.

    • Remove the kickstand from the back cover of the Surface Pro 3.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Sarah Westberg

Membre depuis le 11/03/2019

14 798 Réputation

65 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

142 membres

16 771 tutoriels rédigés

2 commentaires

The title for this repair guide is incorrect. This is for the kickstand, not the battery.

Michael Kavanaugh - Réponse

Hi Michael, thanks for catching this! It looks like someone changed it and it was ok’d on accident. We’ve changed it back.

Sarah Westberg -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 13

30 derniers jours : 84

Total : 2,747