Réparez vos affaires Communauté Boutique

Microsoft Surface Pro 7 Kickstand Replacement

Introduction

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Ce dont vous avez besoin

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: étape 1, image 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: étape 1, image 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: étape 1, image 3 de 3

    • Lift the kickstand to expose the hinge screws.

    Modifier

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: étape 2, image 1 de 2 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: étape 2, image 2 de 2

    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

    Modifier

  4. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: étape 3, image 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: étape 3, image 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: étape 3, image 3 de 3

    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

    Modifier

  5. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: étape 4, image 1 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: étape 4, image 2 de 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: étape 4, image 3 de 3

    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

    Modifier
Conclusion

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Sam Omiotek

Membre depuis le 02/25/19

92 374 Réputation

290 tutoriels rédigés

Badges: 35

+ 32 badges supplémentaires

2 commentaires de tutoriel

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - Réponse

What are the parts used for this fix?

Andrea Shaw - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 12

30 derniers jours : 84

Total : 9,406