Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your finger to press the button and free the device rear case.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
slide the black button to free the battery so you can grab it with your other hand.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two small metal clips keeping the cables safe.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic spudger to pell off the two cables on the back side of the screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic spudger to release the disconnected screen.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.