Aller au contenu principal

Introduction

This guide shows how to remove and replace the back cover for the Moto E4 Plus.

Outils

Pièces

Aucune pièce spécifiée.

  1. Power off your phone before beginning disassembly. Insert the edge of the spudger into the notch on the bottom right corner of the phone. Twist the spudger to start releasing the back cover from the phone.
    • Power off your phone before beginning disassembly.

    • Insert the edge of the spudger into the notch on the bottom right corner of the phone.

    • Twist the spudger to start releasing the back cover from the phone.

    • Slide the spudger along the bottom edge to separate the back cover from the phone.

  2. Lift the phone unit out of the back cover. Lift the phone unit out of the back cover.
    • Lift the phone unit out of the back cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Moto E4 Plus Answers community for help.

Arthur Shi

Membre depuis le 03/01/2018

188 884 Réputation

432 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

146 membres

17 228 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 30

Total : 1,366